To obtain GALILEOS Bite Plates visit our shop. A bite plate contains reference markers and serves the production of a patient-customized scan stent.

Your dental technician manufactures a scan stent, which is worn by the patient during a scan and is based on the GALILEOS Bite Plate and a gypsum model.

After the scan with the GALILEOS 3D x-ray device the patient volume is reconstructed on your PC.

Based on the patients 3D radiography you can perform your implant planning with GALILEOSImplant.

If you are planning on the lower jaw, you may wish to mark the inferior alveolar nerve in a first step.

Now, please send the planning data on a CD ROM to SICAT GmbH & CO.KG in Bonn, Germany - together with the scan stent and the gypsum model. For your convenience we are offering a pick-up service.

The order form for GALILEOS Surgical Guides can be found here.

If you are located in the USA or Canada please use our special form for pick-up service and our special order form.

SICAT will manufacture an accurate surgical guide based on  your implant planning data and the scan stent.

Sicat will provide the surgical guide equipped with

• a pilot drilling system or
• a siCAT sleeve in sleeve system or
• the outer sleeves of established surgical systems

according to your wishes.